An extruded aluminium profile with a fully rounded quadrant face designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations. Available in a wide range of heights and finishes with corresponding Internal and External Aluminium corners avoiding the unsightly and exposed 45º cuts.

Available in Variety of Finishes.

 Where appropriate, trims are supplied with a transparent protective film offering protection during transport, storage, simply peel off after installation.

Sizes (D)

10, 12 mm

Length

2.5 M

Box Qty

20 Nos

 

How to Fix –   

  1. Select Trim according to tile thickness.
  2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
  3. Press the perforated anchoring leg of the profile into the tile adhesive and align, mechanical fix if required
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface.

6. Fill the joint completely with grout.