The ALUMINIUM ‘T’ TRIM is a decorative and practical dividing trim used to cover gaps and slight imperfections in floor finishes at the same height. 

Suitable for use with ceramic tiles, woods and other hard floor finishes the strip will also accommodate and cover small movement between the two floor finishes.

The suitability of product to be installed must be determined if chemical or mechanical stresses are anticipated.

The profile can also be formed to provide a neat and discreet solution to the problem of protecting edges of the floor finishes in curved areas.

When using the mill finish aluminium it is important to note that adhesive and grout residue must be removed from the profile as oxidisation and discolouration will occur.

If using the brass profile then ensure a cleaning regime is undertaken to prevent oxidisation and discolouration.   

 Available in Variety of Finishes.            

How to Fix –   

1.Clean the joint inside (at least a depth of 9 mm).

2.Fill the joint with single-pack silicone or equivalent.

3.Press the profile into the joint until it is completely in contact with the flooring materials.

 4.Remove any surplus adhesive from the edges using cleaning material.